Marine Outfitters Fishing Outfitters
Marine Outfitters
VENOM = Clean Waterline !
Save on Shipping
Marine Outfitters Logo
0
Currency: Canadian Pricing American Pricing


Shaft Shark 500 Split Model

The Ultimate Underwater Protector. Cuts rope, line, weeds and other debris. Price does not include incoming freight.

Usually Stocked Items normally ship immediately or in 1-2 business days. These items are returnable subject to our RETURN POLICY
Quick Access Items normally ship in 1-2 business days. Quick Access Items are returnable subject to our RETURN POLICY but with a restocking fee.
Special Order Items normally need a little extra time to be brought in from our suppliers � in some cases up to 7 business days. Special Orders are returnable subject to our RETURN POLICY but with a restocking fee.
Request Items may take a few days to obtain from our suppliers and pricing may need to be updated. Marine Outfitters will contact you to provide an approximate delivery date and confirmation of price. Request items cannot be returned!
 
Item / Price
Stock Type
Inventory On Hand 04/27 @ 08:48 PM
Product Code
Order Quantity
1-1/2" Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-1.50
1-1/4" Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-1.25
1-3/8" Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-1.375
2" Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-2
2-1/2" Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-2.50
2-1/4" Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-2.25
40mm Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-40mm
45mm Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-45mm
50mm Shaft
$1,239.99
Special Order Item
0
Check Lead Time
Shaft Shark 500-50mm


CUSTOM: shaft-shark-500-split-model

What is a SHAFT SHARK?

The SHAFT SHARK is a serrated edge circular blade … machined from high quality (316L) type stainless steel. It is available as a split 2 x piece unit for quick and simple installation. Also available as a single piece unit for larger shafts.

What does it do?
Attached to your shaft just forward of your propeller, it rotates with the shaft, cutting away any rope, weed or debris that might try to entangle your shaft & propeller.

Why do I need one?
• To keep your propeller free from rope, weeds and underwater debris.
• Eliminate the possibility of damage to your shaft, propeller and strut.
• Eliminate the need for being towed due to fouled stern gear or propeller.

How do I choose the right model?
• Supply the shaft diameter on your boat either standard SAE (inch) or metric.
• Supply the diameter of the fwd end of your propeller hub.

Installation:
Models #300, #400 & #500 are split units and so installation is simple and quick. No need to remove the propeller to install. Installation underwater by a diver? … Yes, simple & easy.

Models #600 & above single piece units will require removal of the propeller to install.

The SHAFT SHARK requires less than 0.90 inch (23mm) of shaft clearance between the cutlass bearing and the propeller hub. Models #600 & above require 1.25~1.50 clearance. This allows for sufficient clearance with the cutlass bearing for shaft movement when maneuvering and for water-flow through the cutlass bearing.

Drag:
The SHAFT SHARK is sized to both the shaft diameter and the propeller hub diameter to ensure the lowest drag factor for the boat. Overall drag will vary depending upon the speed of the boat … the propeller hub diameter and the size of the SHAFT SHARK installed. This is why there are different model units to suit the shaft and hub combinations.

Maintenance:
With no moving parts maintenance is minimal. There are no moving parts to maintain or replace on an annual basis. The edges can be re-sharpened when necessary.

 

Saildrive units available upon request. Please call us to order.



Currency: Canadian Pricing American Pricing


Shaft Rope Cutters